![SPT-Labtech-White-Logo.png]](https://www.sptlabtech.com/hs-fs/hubfs/Admin/Logos/SPT-Labtech-White-Logo.png?height=50&name=SPT-Labtech-White-Logo.png){kind=logo}
lab2lab
lab2lab is a unique sample transport and instrument control system. 2D-barcoded vials are transported pneumatically through pipes connecting research
Managers Manual
- Lab2lab lab manager's manual - 1.0
- Safety - 2.0
- Safety - 2.1 Hazard summary
- Lab2lab overview - 3.0
- Lab2lab overview - 3.1 Overall layout
- Lab2lab overview - 3.2 Pneumatic transport system
- Lab2lab overview - 3.3 Software network architecture
- Lab2lab overview - 3.4 Sender
- Lab2lab overview - 3.5 Transport Pipes
- Lab2lab overview - 3.6 Automation sender
- Lab2lab overview - 3.7 Router
- Lab2lab overview - 3.8 Waste bin
- Lab2lab overview - 3.9 Buffer
- Lab2lab overview - 3.10 Receiver
- Lab2lab overview - 3.11 Collection point
- Lab2lab overview - 3.12 building2building
- Labware - 4.0
- Before use - 5.1 Connection to services
- Before Use - 5.2 Software Installation
- Before Use - 5.3 Operator training
- Lab2lab software - 6.1 Director
- Lab2lab software - 6.2 Setup files
- Lab2lab software - 6.3 Settings
- Lab2lab software - 6.4 Instrument Controllers
- Lab2lab clients - 7.0
- Using lab2lab - 7.1 Sender
- Using lab2lab - 7.2 Collection Points
- Using lab2lab - 7.3 Waste bin
- Using lab2lab - 7.4 Client Software
- Using lab2lab - 7.5 Director Software
- Routine inspection and cleaning - 8.0
- Contact customer support - 9.0
- Compliance information - 10.0
Basic Operators Manual
- Introduction - 1.0
- Submitting a sample - 2.1 - Preparing a sample vial
- Submitting a sample - 2.2 Starting the software
- Submitting a sample - 2.3 Using lab2lab client software to request sample analyses
- Submitting a sample - 2.4 Using the sender
- Tracking vials in the lab2lab system - 3.0
- Editing vials in the lab2lab system - 4.0
- Collecting vials after analysis - 5.0
- Getting help - 6.0
Single Page lab2lab Instructions
Owners Maintenance Manual
- Lab2lab owner's maintenance manual - 1.0
- Safety - 2.0 - Owner's Maintenance Manual
- Safety - 2.1 Hazard Summary - Maintenance Manual
- Safety - 2.2 Manual Handling
- Safety - 2.3 Waste Handling
- Safety - 2.4 Restarting after a power failure
- Safety - 2.5 EMC and static discharge
- Lab2lab system control - 3.1 Pneumatic transport system
- Lab2lab system control - 3.2 Software network
- Lab2lab system control - 3.3 Hardware control
- Routine inspection and cleaning - 4.0
- Routine inspection and cleaning - 4.1 Clearing up leakages and spillages
- Adjusting the air pressure for a lab2lab device - 5.0
- Adjusting the airflow to a sender or receiver - 6.0
- Error Recovery - 7.0
- Error Recovery - 7.1 Vial transportation errors
- Error recovery - 7.2 Vial failed to send / failed to arrive at router
- Error recovery - 7.3 Free vial trapped in transport (flexible) pipe
- Error recovery - 7.4 Lost comms to a sender
- Error recovery - 7.5 Analysis timeout
- Error recovery - 7.6 Reduced capacity
- Error recovery - 7.7 Vial fails to leave the buffer
- Error recovery - 7.8 Vial fails to drop into the waste bin
- Error recovery - 7.9 Vial no longer in receiver when arm retracted
- Error recovery - 7.10 Vial fails to arrive at the router
- Error recovery - 7.11 Retrieving a vial without a cap
- Error recovery - 7.12 Vial trapped in the router
- Error recovery - 7.13 System down
- Decommissioning - 8.1 Decommissioning & storage
- Contact support - 9.0
- Compliance information - 10.0 - Owner's Maintenance
- Compliance - 10.1 CE Marking Declaration of Conformity
Installation Requirements
- Lab2lab installation requirements - 1.0
- Lab2lab installation requirements - 1.1 - Environmental requirements
- Lab2lab terminology - 2.1 Pipes
- Lab2lab terminology - 2.2 Conduit
- Lab2lab terminology - 2.3 Vials
- Device summary - 3.0
- Device summary - 3.1 Device dimensions
- Installing devices - 4.1 Transportation
- Installing devices - 4.2 Configuring lab2lab
- Installing devices - 4.3 Router
- Installing devices - 4.4 Building2building Transceiver
- Installing devices - 4.5 Receiver (all types)
- Installing devices - 4.6 Sender
- Installing devices - 4.7 Automation sender
- Installing devices - 4.8 Buffer
- Installing devices - 4.9 Collection station
- Installing devices - 4.10 Alarm
- Services - 5.0
- Services - 5.1 Compressed air
- Services - 5.2 Power
- Services - 5.3 ESD ground (senders & receivers)
- Services - 5.4 Network
- Lab2lab director - 6.0
- Lab2lab director - 6.1 External software access to lab2lab systems
- Lab2lab clients - 7.1 2D barcode readers
- Labware - 8.0
- Labware - 8.1 Labware quality certificate
- Transport pipes - 9.0
- Transport pipes - 9.1 Installing PTFE pipes
- Transport pipes - 9.2 Pipe installation options
- Transport pipes - 9.3 Spare pipes
- Contact support - 10.0
- Lab2lab and building2building components - 11.0
System Administrators Manual
- Lab2lab system administrators manual - 1.0
- Lab2lab overview - 2.0
- Lab2lab software overview - 3.0
- Oracle database - 4.0
- Lab2lab director: configuration - 5.1 Lab2lab system configuration
- Lab2lab director: configuration - 5.2 Runtime application settings
- Lab2lab director: user interface - 6.1 Starting lab2lab
- Lab2lab director: user interface - 6.2 System page
- Lab2lab director: user interface - 6.3 Samples page
- Lab2lab director: user interface - 6.4 Service page
- Lab2lab director: user interface - 6.5 ? menu
- Log files - 7.0
- Shutting down lab2lab - 8.1 Shutting down devices
- Shutting down lab2lab - 8.2 Shutting down Director
- Restarting lab2lab - 9.1 Restarting director
- Restarting lab2lab - 9.2 Restarting devices
- Director PC backup - 10.1 General
- Director PC backup - 10.2 Switching PCs
- Director PC backup - 10.3 Redirecting clients
- Lab2lab software design - 11.0
- Lab2lab software design - 11.1 - Vial detection
- Lab2lab software design - 11.2 Identifying vials and associating them with methods
- Lab2lab software design - 11.3 Routing vials for analysis
- Lab2lab software design - 11.4 Analysis
- Lab2lab software design - 11.5 - Routing vials after analysis
- Lab2lab software design - 11.6 Error recovery
- Lab2lab.ini file - 12.0
- Lab2lab.ini file - 12.1 System
- Lab2lab.ini file - 12.2 Clients
- Lab2lab.ini file - 12.3 Method types count and names
- Lab2lab director config.xml file - 13.0
- Lab2lab director config.xml file - 13.1 System
- Lab2lab director config.xml file - 13.2 BetaRelease
- Lab2lab director config.xml file - 13.3 Database
- Lab2lab director config.xml file - 13.4 Lab2lab Server
- Lab2lab director config.xml file - 13.5 Management
- Lab2lab director config.xml file - 13.6 Transport
- Lab2lab director config.xml file - 13.7 Router
- Lab2lab director config.xml file - 13.8 Buffers, building2building (B2B) ports, senders and instrument stations
- Lab2lab director config.xml file - 13.9 Alarms
- Lab2lab director config.xml file - 13.10 Serial number
- Lab2lab director config.xml file - 13.11 Location
- Building2building - 14.0
- Building2building - 14.1 Building2building configuration
- Building2building - 14.2 Configuration
- Superconductor - 15.0
- Contact support - 16.0