![SPT-Labtech-White-Logo.png]](https://www.sptlabtech.com/hs-fs/hubfs/Admin/Logos/SPT-Labtech-White-Logo.png?height=50&name=SPT-Labtech-White-Logo.png){kind=logo}
chameleon
chameleon automates the consistent application of samples to high-quality foil grids for cryo-EM analysis, saving time and improving research outcomes
User Guide
- Safety - 1.1 Warnings
- Safety - 1.2 Ergonomics
- Safety - 1.3 chameleon EMC (electromagnetic compatibility)
- Safety - 1.4 chameleon noise levels
- Specific Risks 2.0
- Specific Risks - 2.1 Low temperature hazards
- Specific Risks - 2.2 Explosion
- Specific Risks - 2.3 Ethane hazards
- Specific Risks - 2.4 Asphyxiation
- Specific Risks - 2.5 Biohazards
- chameleon Overview 3.0
- chameleon Overview - 3.1 Intended use
- Pre-installation requirements 4.0
- Installation 5.0
- Installation - 5.1 Environmental
- Installation - 5.2 Interface with utilities
- Installation - 5.3 User training
- Access and Guarding - 6.0
- Access and Guarding - 6.1 Lower doors
- Access and Guarding - 6.2 Upper doors
- Access and Guarding - 6.3 Cryogen drawer
- Automated sample preparation zone - 7.0
- Automated sample preparation zone - 7.1 Sample loading station
- Automated sample preparation zone - 7.2 Dispenser
- Automated sample preparation zone - 7.3 Grid Handling
- Automated sample preparation zone - 7.4 Humidity shroud assembly
- Lower cabinet - 8.0
- Lower cabinet - 8.1 Consumable drawers
- Lower cabinet - 8.2 Humidifier
- Lower cabinet - 8.3 Wash and waste bottles
- Lower cabinet - 8.4 Air regulator
- Lower cabinet - 8.5 PC
- Cryogen drawer - 9.0
- Running the system - 10.1 Consumables
- Running the system - 10.2 Equipment required to run chameleon
- Running the system - 10.3 chameleon consumables
- Software overview - 11.0
- Software overview - 11.1 Main toolbar icons
- Software overview - 11.2 Status panel information
- Software overview - 11.3 Initialize system
- Software overview - 11.4 Select mode
- Software overview - 11.5 Prepare grids workflow - preload grids
- Software overview - 11.6 Prepare grids workflow - preload sample
- Software overview - 11.7 Prepare grids workflow - preload cryogens & button
- Software overview - 11.8 Prepare grids workflow - degas supply bottle
- Software overview - 11.9 Prepare grids workflow - dispenser set up
- Software overview - 11.10 Prepare grids workflow - test dispenser
- Software overview - 11.11 Prepare grid workflows - activating grids
- Software overview - 11.12 Prepare grids workflow - dispenser setup
- Software overview - 11.13 Prepare grids workflow - retest dispenser
- Software overview - 11.14 Prepare grids workflow - plunge control
- Software overview - 11.15 Prepare grids workflow - review dispense video
- Software overview - 11.16 Prepare grids workflow - releasing grid
- Software overview - 11.17 Prepare grids workflow - confirm grid released
- Software overview - 11.18 Prepare grids workflow - enter grid acceptance notes
- Software overview - 11.19 Prepare grids workflow - reason for rejection
- Software overview - 11.20 Prepare grids workflow - loads more grids?
- Software overview - 11.21 Prepare grids workflow - additional grid activation
- Software overview - 11.22 Prepare grids workflow - topping up cryogens
- Software overview - 11.23 Prepare grids workflow - grid history flip out
- Software overview - 11.24 Prepare grids workflow - replenish sample
- Software overview - 11.25 Prepare grids workflow - clean dispenser
- Software overview - 11.26 Prepare grids workflow - test dispenser
- Software overview - 11.27 Prepare grids workflow - load new sample
- Software overview - 11.28 Prepare grids workflow - dry dispenser
- Software overview - 11.29 Prepare grids workflow - remove grids
- Software overview - 11.30 Prepare grids workflow - remove cryogens
- Software overview - 11.31 Prepare grids workflow - finished
- Software overview - 11.32 Prepare grids workflow - report generation
- Software overview - 11.33 Prepare grids workflow - keep sample
- Software overview - 11.34 Clean dispenser workflow - clean dispenser
- Software overview - 11.35 Clean dispenser workflow - finished
- Software overview - 11.36 Retrieve grid workflow - retrieve grid
- Software overview - 11.37 Retrieve grid workflow - finished
- Care and maintenance - 12.1 Cleaning
- Care and maintenance - 12.2 Routine preventative maintenance
- Decommissioning - 13.1 Putting chameleon into storage
- Contact support - 14.0
- Compliance information - 15.0
- Compliance information - 15.1 CE marking declaration of conformity