The cooling block helps protect the integrity of sensitive samples and reagents during reaction set-up. The block has been designed to fit on the mosquito deck and to provide a high heat capacity, so that the plates remain cool for a longer time. The cooling block is pre-cooled in the -20°C freezer before use. It fits all mosquito models and dragonfly^® discovery.

An essential accessory for every NGS lab, the magnetic bead separation block has been optimized for miniaturized SPRI bead clean-ups with mosquito^® HV genomics. The Block and the corresponding mosquito protocol provide a semi-automated process that combines significant cost savings with high recovery rates.

Plate seal holder for hanging drop preparations. Calibration block for optimizing mosquito. Set-up guide base for positioning. Hanging drop seal onto reservoir plate. Pipette tape spool cover to protect tips from environmental particles. 4-position ultra-low reagent holder to conserve valuable sample.

mosquito’s active humidity chamber reduces experimental inconsistencies caused by variation in the humidity in the environment, by allowing users to control the relative humidity of each experiment. The humidity chamber enables up to a 90% reduction in drop evaporation.

A knurled metal coupling for joining two Hamilton Gastight^® Syringes, with very low dead volume, used in mixing the protein and monoolein to prepare the LCP mixture, either using our LCP mixer or manually.

A short, precisely cut, low dead volume needle compatible with the 50 μL or 100 μL Hamilton Gastight^® Syringes used by mosquito LCP.

Automatically mix protein and monooelin (MO) or other lipids into a lipidic cubic phase from two coupled syringes. It accepts two 100 µL or two 50 µL Hamilton Gastight syringes.